| Warranty: | 1 Year |
|---|---|
| Type: | Parallel Three-Screw Extruder |
| Plastic Processed: | Degradable Plastic |
| Product Type: | Granulating Extruder |
| Feeding Mode: | One Feed |
| Assembly Structure: | Integral Type Extruder |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Yatong Three-screw granulator / pelletizing machine for degradable material
1. High productivity
The daily production capacity of the three-screw extruder can reach 100 tons; the production capacity is high, the energy consumption is low, and the operation is fully intelligent.
2. Save costs
Cost-saving product dispersion effect: the blown film has no black spots. The filter pressure is high. The tensile strength is strong. The bending effect is good. The traditional heating method adopts heating plate heating, heating from the outside to the inside, and the heat preservation effect is poor, resulting in uneven heating of the material in the cylinder and heavy load. The three screws are heated by heating rods, and the heating rods are installed in the cylinder, and the heating method is from the inside to the outside. The heating and heat preservation effect is good, and the material is heated evenly. Save 25%-35% annually on heating and electricity costs
3. High cutting efficiency and good plasticizing effect
The three screws are arranged in a straight line, the twin screws have one meshing point, and the three screws have two meshing points. That is equivalent to two twin screws, so it has high shear efficiency, high mixing, high plasticization, high exhaust performance, and high dispersion. .Sufficient plasticization and uniform dispersion. The three screws arranged in a straight line enlarge the rolling area, strengthen the kneading effect, and have a better plasticizing. Shearing effect. Due to the existence of two meshing areas, the rolling area Multiplying makes the dispersion more uniform.
4. Good exhaust performance
There is no accumulation of any material in the exhaust port of the machine, and there is no phenomenon of material ejection, blockage, etc. The reason is that almost all materials are sucked into the honey refining area at the center of the screw. The dense refining area is equivalent to a melt pump, so it will not be exposed. material. Therefore, the machine can reach a high degree of vacuum, which improves the quality of the product.
5. The material stays in the barrel for a short time and is not easily degraded
The residence time of materials in the barrel can be shortened by one-sixth, so this machine is suitable for materials that are heat sensitive, thermoplastic and afraid of degradation. In the case of the same formula, the three-screw L/D ratio is shorter than the twin-screw L/D ratio, which can also surpass the effect of the twin-screw implementation.
At present, our company's three-screw products have been recognized by many companies in the market, especially in the production of color masterbatch, the same model has increased by 80%, the thermoplastic elastomer has increased by 70%, the filling masterbatch has increased by 90%, the degradable material has increased by 80%, and the polymer The polymer modified material is increased by 75%, and the PP/PE polymer modification is increased by 75%. The triple screw can achieve fast in and out, which maximizes the protection of the polymer flow rate additives in it.
6. T-type high torque gearbox
The T-type high-torque gearbox is an ultra-high torque gearbox specially developed for the three-screw independently to cooperate with the three-screw extrusion to achieve various effects ~ high output, high mixing, high dispersion, high shear, ultra-high displacement Gas performance, low load, low energy consumption and other advantages
Main Technical Parameter
| MODEL |
SCREW DIAMETER
(MM)
|
SCREW ROTATED SPEED
(R/MIN)
|
MAIN MOTOR POWER
(KW)
|
TORQUE CLASS
(T/A3)
|
CAPACITY
(KG/H)
|
| TSSK-36B | 35.6 | 500/600 | 22/28 | 5.2 | 80-250 |
| TSSK-36D | 35.6 | 800 | 37/45 | 7.9 | 180-380 |
| TSSK-50B | 50.5 | 400/500/600 | 55/75/90 | 5.3 | 200-420 |
| TSSK-52B | 51.4 | 400/500/600 | 55/75/90 | 5.3 | 200-420 |
| TSSK-52D | 51.4 | 800 | 75/90/110 | 5.4 | 280-450 |
| TSSK-65B | 62.4 | 400/500/600 | 90/110/132 | 5.9 | 350-650 |
| TSSK-65D | 62.4 | 900 | 132/160/185 | 10.3 | 580-900 |
| TSSK-75B | 71 | 400/500/600 | 132/160/185 | 5.7 | 700-1200 |
| TSSK-75D | 71 | 600/900/1200 | 160-355 | 10.6 | 800-1800 |
| TSSK-95B | 93 | 400/500/600 | 280/315/355 | 8.9 | 1500-3000 |
| TSSK-95B | 93 | 600/900 | 800/1000 | 9.1 | 3500-5000 |
Remark: If the equipment or the technological parameters have some change, we shall not make a notice separately
Transportation and Packing
• For the loose cargo we will packing by wooden box
• For the full container loading we are packing the machine by film and some on pallet accordingly
• We can ship the goods by air or by sea
• We will send pictures of cargo loading to our client to check and keep recording
• We can send cargo to client's warehouse to loading
Do you know our service?
1. The machine inspection before delivery in YATONG MACHINERY When you come to our factory .Check everything is it ok .
2. Free of charge of some necessary spare part.
3. One year guaranteeof all the machines running , if any problem ,we will bear. Of course if the machines after one year ,you also can ask for the technical guidance
4. 1-2 technical engineers will be come to your factory to installation and commissioningthe machines and train your workers if you need.
5. We accept 30% TT down payment, 70% TT or LC at sight before delivery
6. Film packing or plywood packing suit for sea shipping.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}